we are a professional construction machine supplier and constantly focus on the quality of our products. With experience of 25 years, we offer innovating solutions in raw material processing machine series. Our products have been sold to more than 30 countries and regions with very competitive price and advantaged function to meet different demonds of customers. We devote to contribute an additional value to customers.
Metal Pipe Corrugated Duct Making Machine
Post Tension Duct Forming Machine
corrugated round Steel Metal Pipe Galvanized Metal Duct Making Machine
Steel pipe making machine spiral corrugated round duct forming machine
Steel pipe making machine spiral corrugated round duct forming machine is a special equipment to produce metal ducts, which are used for the pre-arranged holes in prestressing concrete. It can produce single-ripple and four-ripple metal ducts with diameters between Φ35 mm and Φ350mm. The machine is suitable for both on-site and in-factory constructions. In addition, our company also produces Flat Pipe making Machine, which is an auxiliary device for cs130 and is used for slab anchors.
Qingdao Cuishi Machinery Co., Ltd. specializes in making full-automatic metal bellows machines. On average, one machine is delivered every day, which is in short supply and has been highly praised by market customers
The machine is widely used in highway bridges and is highly praised by customers in Yunnan, Guizhou, Sichuan, Henan and Hebei
Prestressed corrugated metal bellow has been widely used in modern construction by developed countries such as Britain, France, the United States and Japan. It is light, thin-walled, rigid, non-breakable and non-leaking, because of the obvious concave and convex four waves on the exterior of the pipe body, the steel pipe joints are tightly embossed, firm and non-disconnected, and the contact grip with concrete is extremely strong after casting on site, and the concrete is formed into a complete whole, enhancing the seismic performance of the structure. It has excellent function, compared with the general solid flat slab, it has light self-weight, large span, small deflection, no column cap, good safety, low comprehensive cost, thus improving the building headroom, increasing the use and sales area, compared with the existing domestic ordinary beam-slab structure, solid beamless slab, unbonded prestressed concrete floor slab, saving steel 12.5%, saving concrete volume 30-50%%, saving vertical water, electricity, air conditioning, It also has the effect of sound insulation and heat insulation, which brings considerable economic benefits to the owner.
Prestressed corrugated metal bellow is mainly used in highway bridges, railroad bridges, construction of water conservancy, electric power and other national key projects. Corrugated pipe and accessories consisting of prestressing hole-forming system should meet the needs of post-tensioning prestressing grouting; the connection between pipe and tube, in addition to the hot welding connection, should also provide a special sealing connection device, this device should be with a hole grouting process of exhaust, drainage, slurry and observation of the efficacy of the discharge pipe, in order to achieve pressure grouting or vacuum-assisted grouting.
- As an industry benchmark, the following are our advantages
- Full automatic Siemens touch screen control system, winding and belt feeding, cutting and unloading, control sawing, automatic speed reduction, automatic cutting and automatic speed increase, automatic unloading, can be made into a shelf, the material can be automatically unloaded into the shelf, and the crane can be hoisted directly when it is full. If it is cut manually for half a minute, it will be cut once, which is especially labor-intensive
Our speed is about 20 meters per minute, 10000 meters in 8 hours, four wave design
Advantages
1. Have a certain strength that is sufficient to maintain its shape and resist damage, penetration or deformation during construction;
2. Sufficient flexibility to accommodate special forms of prestressing tendon laying;
3. Have certain resistance to abrasion in order to prevent the orifice from being destroyed by the prestressing tendons during cable transfer and tensioning.
4. The cross-sectional area inside the bellows is at least 2~2.5 times of the prestressing tendons
5. With certain sealing, to ensure the sealing connection between bellows and anchorage, bellows and bellows;
6. Have a certain bonding ability
corrugated pipe machine a kind of equipment for producing pre-stressed concrete reserved tunnel metal bellows makes the galvanized steel strip coil into four wave shape then undercuts and swages to apply the bellows, Which With high efficiency and Small volume, Easy operation and maintenance, convenient and speed adjustable. It is suitable for centralized use at construction sites and factories.
Model CUISHI-110
Width of strip 78mm fixed
Thickness of steel band 0.2-0.6mm
Pipe diameter Φ40-φ130
Pipe Joint mode Four l-lock
Weight 1200Kg
Pipe rolling speed 20m/min(maximum)
Power 15KW+2.2kw
Cutting motor: Model Automatic
Power 3KW
| Name |
LOGO |
Specification |
| |
|
|
Automatic prestressed metal bellows equipment
Automatic unwinding, Siemens PLC touch screen control, sinusoidal frequency converter, 15kw motor, automatic cutting, unloading, far infrared control, excluding mold |
WY |
78 steel strip
Four wave design |
| 2.mould |
WY |
40,45,50,55,60,65,70,75,80,85,
90,95,100,105,132mmm |
| 3.welding machine |
WY |
|
We use 78 steel strip, not 36 steel strip. It is light in weight and fast in speed. The four ripple design is easy to control and debug. It helps customers save about 1 ton of material every day. For example, a roll of steel strip weighs 350 kg and has an inner diameter of 500. We have infrared sensing device. If there is no steel strip, we will stop automatically. The workers can connect the steel strip with our electric welding machine, and the skilled workers will complete the operation within 10 minutes
For length cutting, we have a travel switch on the reversing table. For example, everything in 10 meters will be cut automatically in half a minute
Meter weight is light, which can save customers nearly 1 ton of material in a day. Taking 85mm weight per meter as an example, the customer used to design 765G before, but now our machine is 645g, saving 120g steel belt per meter
Taking 55mm as an example, the weight of the meter produced by our machine is 397G, which saves 100g. Considering all specifications, the average material saving is 12.5% per meter, and the production speed is 2.5 times faster. The time for changing the mold and discharging the pipe is about 20 minutes, the wave height below 95mm is more than 2.5mm, and the diameter above 100mm is 3mm
Audited Supplier 
){kind=link}