PE Pipe Polyethylene Irrigation Pipe Making Production Line

• Customization: Available
• Warranty: Longtime
• Product Type: PPR
• Model NO.: plastic pipe machine
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, SGS
• Customized: Customized
• Condition: New
• After-sales Service: Longtime
• Transport Package: Pipe Machine
• Specification: 50-160MM
• Trademark: wangyuan
• Origin: China
• HS Code: 8477209000
• Production Capacity: 20 Sets

Product Description

PE PIPE PRODUCTION LINE

PE series plastic pipe production line is mainly used in the production of agricultural water supply and drainage, construction water supply and drainage, and engineering cable laying. The machine is composed of vacuum setting table, tractor, storage rack and so on. The single-screw extruder and traction machine use imported AC frequency conversion adjustment device, and the vacuum pump and traction motor are all high-quality products. Two-claw, three-claw, four-claw, six-claw, eight-claw, ten-claw, ten-claw, twelve-claw and other traction methods of the traction machine. Chipless cutting, saw blade cutting or planetary cutting can be selected, the unit has reliable performance and high production efficiency.

PPH pipe extrusion  plastic extruder PPR PPH tubing equipment 
PPH pipe extrusion solution and configuration

Plastic Pipe Making Machine PPR PE HDPE Pipe Extruding Machine for Sale
PE/PP/PPR pipe production line,can be used to produce PPR hot and cold water pipes,PE pipe,silicon core tube,the production line can be used to produce a single extruder monochrome tube,can also be used to produce multiple extruders through the co-extrusion head multi-layer color tube.

The commonly used PE irrigation pipe pressure range is between 0.6-1.6MPa, the color is mostly black or white, and the material is high-density polyethylene (HDPE) pipe

1. Extrusion process

• The PPH pipe is extruded directly in the extruder, and the extruded pipe has high dimensional accuracy.

• The PPH pipe has a fine crystalline structure, which gives it excellent impact resistance even at low temperatures.

2. Configuration

• The extrusion line is usually composed of an extruder, a die, a calibration device, a cooling system, and a traction device.

• The extruder is the core component of the extrusion line, which melts and extrudes the PPH material.

• The die is used to shape the extruded pipe.

• The calibration device is used to calibrate the diameter and wall thickness of the pipe.

• The cooling system is used to cool the extruded pipe to ensure its shape and performance.

• The traction device is used to pull the extruded pipe at a constant speed.

In summary, the extrusion process and configuration of PPH pipes are crucial for ensuring the quality and performance of the pipes. The selection of extrusion equipment and process parameters should be based on the specific requirements of the pipe production to ensure the stability and reliability of the extrusion process.

The advantages of adding a meter weight system for pipe materials are as follows:

1. Precise control of the weight per unit length of the pipe, ensuring product quality consistency.

2. Ability to real-time monitor and adjust the extrusion process to achieve optimal production parameters.

3. Enhance production efficiency and reduce waste.

4. Facilitate accurate dosing of raw materials, optimizing the use of resources.

5. Provide data support for quality management and process improvement.

6. Ensure the stability and reliability of the production process.

7. Allow for quick response to changes in production conditions to maintain product specifications.


The application scenarios of adding a meter weight system for pipe materials mainly include the following:

1. Plastic pipe production: To accurately control the weight and quality of plastic pipes.

2. Industrial pipe manufacturing: In the production of various industrial pipes to ensure consistent specifications.

3. Construction pipe production: For the production of pipes used in construction projects to meet specific requirements.

4. Special pipe production: Such as in the production of pipes with special materials or performance requirements.

Process Flow:
Single screw extruder →Co-extruder for color string & Multi Layers → Mould → Vacuum Calibration Tank → Spray Cooling Water Tank →Haul-off → No Dust Cutter → Stacker → Final Product Inspecting &Packing

No.	Item	Quantity
1	Vacuum feeding machine	1 set
2	SJ75/33 Single Screw Extruder	1 set
3	Die Head And Sizing Mould	1 set
4	Vacuum Water Cooling Tank	1 set
5	Spray Cooling Tank	1 set
6	Haul off machine	1 set
7	Cutting device	1 set
8	Auto stacker	1 set
9	Free spare parts	1set